|
Energy conversion efficiency is not defined uniquely, but instead depends on the usefulness of the output. All or part of the heat produced from burning a fuel may become rejected waste heat if, for example, work is the desired output from a thermodynamic cycle. Energy converter is an example of an energy transformation. For example a light bulb falls into the categories energy converter. \eta = \frac{P_\mathrm{out}}{P_\mathrm{in}} Even though the definition includes the notion of usefulness, efficiency is considered a technical or physical term. Goal or mission oriented terms include effectiveness and efficacy. Generally, energy conversion efficiency is a dimensionless number between 0 and 1.0, or 0% to 100%. Efficiencies may not exceed 100%, e.g., for a perpetual motion machine. However, other effectiveness measures that can exceed 1.0 are used for heat pumps and other devices that move heat rather than convert it. When talking about the efficiency of heat engines and power stations the convention should be stated, i.e., HHV (aka Gross Heating Value etc.) or LCV (aka Net Heating value), and whether gross output (at the generator terminals) or net output (at the power station fence) are being considered. The two are separate but both must be stated. Failure to do so causes endless confusion. Related, more specific terms include Electrical efficiency, useful power output per electrical power consumed; Mechanical efficiency, where one form of mechanical energy (e.g. potential energy of water) is converted to mechanical energy (work); Thermal efficiency or Fuel efficiency, useful heat and/or work output per input energy such as the fuel consumed; 'Total efficiency', e.g., for cogeneration, useful electric power and heat output per fuel energy consumed. Same as the thermal efficiency. Luminous efficiency, that portion of the emitted electromagnetic radiation is usable for human vision. Fuel heating values and efficiency In Europe the usable energy content of fuel is typically calculated using the lower heating value (LHV) of that fuel, which definition assumes that the water vapor produced during fuel combustion (oxidation), remains gaseous, and is not condensed to liquid water so the latent heat of vaporization of that water is not usable. Using the LHV, a condensing boiler can achieve a "heating efficiency" in excess of 100% (this does not violate the first law of thermodynamics as long as the LHV convention is understood, but does cause confusion). This is because the apparatus recovers part of the heat of vaporization, which is not included in the definition of the lower heating value of fuel. In the U.S. and elsewhere, the higher heating value (HHV) is used, which includes the latent heat for condensing the water vapor, and thus the thermodynamic maximum of 100% efficiency cannot be exceeded with HHV's use. Example of energy conversion efficiency Wiki letter w.svg This article is missing information about clear definition of the energy conversion efficiency for light sources. The lighting efficiency is given by the luminous efficacy which does not allow to give a simple percentage without specifying what "100%" would be. If there is an ISO standard or another reliable source defining the energy conversion efficiency in lighting, please cite it. . Please expand the article to include this information. Further details may exist on the talk page. (May 2012) Conversion process Energy efficiency Electricity generation Gas turbine up to 40% Gas turbine plus steam turbine (combined cycle) up to 60% Water turbine up to 90% (practically achieved) Wind turbine up to 59% (theoretical limit) Solar cell 6–40% (technology-dependent, 15% most often, 85–90% theoretical limit) Fuel cell up to 85% World Electricity generation 2008 Gross output 39%, Net output 33%[1] Engine/Motor Combustion engine 10–50%[2] Electric motors 70–99.99% (> 200 W); 50–90% (10–200 W); 30–60% (< 10 W) Natural process Photosynthesis up to 6%[3] Muscle 14–27% Appliance Household refrigerators low-end systems ~ 20%; high-end systems ~ 40–50% Incandescent light bulb 0.7–5.1%,[4] 5–10%[citation needed] Light-emitting diode (LED) 4.2–14.9%,[4] up to 35%[5][dead link] Fluorescent lamps 8.0–15.6%,[4] 28%[6] Low-pressure sodium lamps 15.0–29.0%,[4] 40.5%[6] Metal-halide lamps 9.5–17.0%,[4] 24%[6] Switched-mode power supply currently up to 96% practically Electric shower 90–95% (multiply with the energy efficiency of electricity generation for comparison with other water-heating systems) Electric heaters ~100% (essentially all energy is converted into heat, multiply with the energy efficiency of electricity generation for comparison with other heating systems) Others Firearm ~30% (.300 Hawk ammunition) Electrolysis of water 50–70% (80–94% theoretical maximum) Energy conversion efficiency (η) is the ratio between the useful output of an energy conversion machine and the input, in energy terms. The useful output may be electric power, mechanical work, or heat. |
About us|Jobs|Help|Disclaimer|Advertising services|Contact us|Sign in|Website map|Search|
GMT+8, 2015-9-11 20:51 , Processed in 0.158063 second(s), 16 queries .
